Pre-launch preview: not indexed by search engines. Text marked PLACEHOLDER is not final.

Heating cost comparison: cost per unit of heat

Fuels are sold in different units and burned at different efficiencies. This calculator puts them on one scale: what each option costs per kWh of heat delivered to your home.

Calculator

United States
Inputs

Best answer

Lowest cost per kWh of heat (of the options entered)$0.18/kWh

Scope: cost of heat delivered by the equipment (duct and distribution losses, maintenance and installation not included)

$0.18/kWh$0.18/kWh
Low $0.18/kWh · likely $0.18/kWh · high $0.18/kWh

No input here carries a documented range, so no range is shown.

Electric resistance: per kWh of heat
$0.18/kWh
Heat pump: per kWh of heat
enter its HSPF2 or COP
Gas furnace: per kWh of heat
enter a gas price and AFUE
Propane: per kWh of heat
enter a propane price and AFUE
Heating oil: per kWh of heat
enter an oil price and AFUE

Formula Showdown

There is one formula: price per unit of fuel energy ÷ efficiency. The open question is the heat pump’s efficiency outside its rating climate: the rated HSPF2 is one value for one climate region, and a climate-adjusted method is waiting for a verified source.

Solve for any input

Show the work
  1. Electric resistance heat: cost per kWh of heat: Electricity price ÷ 100% efficiency
    c_res = $0.18/kWh ÷ 100% = $0.18/kWh[1]

Sources & data version

  1. U.S. Department of Energy, Energy Saver (n.d.). Electric Resistance Heating. energy.gov/energysaver. Verified 2026-10-02.
  2. U.S. Department of Energy, Energy Saver (n.d.). Furnaces and Boilers. energy.gov/energysaver. Verified 2026-10-02.
  3. U.S. Department of Energy (2025). 10 CFR Part 430, Subpart B, Appendix M1: test procedure for central air conditioners and heat pumps (2025 edition). Code of Federal Regulations (annual edition revised as of 2025-01-01), govinfo.gov. Verified 2026-10-02.
  4. U.S. Energy Information Administration (n.d.). Energy Explained: British thermal units (Btu), conversion factors. eia.gov. Verified 2026-10-02.
  5. Cutler D, Winkler J, Kruis N, Christensen C, Brandemuehl M (2013). Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations. National Renewable Energy Laboratory, Technical Report NREL/TP-5500-56354 (DOI 10.2172/1067909). Verified 2026-10-02.
  • Electricity price: EIA-861M monthly sales and revenue by state: residential average price (Monthly-States sheet) (US, calculated by us), 2025-09 to 2026-08 (version 2026-08+ea3ef7ff, fetched 2026-11-20)
  • Propane heat content: Propane: 1 gallon = 91,452 Btu. EIA “sample” conversion factor, recalculated each year; current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)
  • Heating oil heat content: Heating oil: 1 gallon = 138,500 Btu. EIA “sample” conversion factor; EIA states no further basis (it lists diesel fuel separately at 137,381 Btu per gallon). Current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)

Changelog · Methodology

Use this result in

Add the options you can choose between: a heat pump’s HSPF2 (or COP), and the price and AFUE of gas, propane or oil. Only the electricity price comes from the data for your location.

Embed this calculator

Copy this code. The visible credit link must stay.

<iframe src="https://thebestcalculator.com/embed/heating-cost-comparison/" title="Heating cost per unit of heat: which fuel is cheapest?" width="100%" height="720" loading="lazy"></iframe>
<p><a href="https://thebestcalculator.com/">Calculator by The Best Calculator</a></p>
Europe (EUR)
Inputs

Best answer

Lowest cost per kWh of heat (of the options entered)€0.283/kWh

Scope: cost of heat delivered by the equipment (duct and distribution losses, maintenance and installation not included)

€0.283/kWh€0.283/kWh
Low €0.283/kWh · likely €0.283/kWh · high €0.283/kWh

No input here carries a documented range, so no range is shown.

Electric resistance: per kWh of heat
€0.283/kWh
Heat pump: per kWh of heat
enter its HSPF2 or COP
Gas furnace: per kWh of heat
enter a gas price and AFUE
Propane: per kWh of heat
enter a propane price and AFUE
Heating oil: per kWh of heat
enter an oil price and AFUE

Formula Showdown

There is one formula: price per unit of fuel energy ÷ efficiency. The open question is the heat pump’s efficiency outside its rating climate: the rated HSPF2 is one value for one climate region, and a climate-adjusted method is waiting for a verified source.

Solve for any input

Show the work
  1. Electric resistance heat: cost per kWh of heat: Electricity price ÷ 100% efficiency
    c_res = €0.283/kWh ÷ 100% = €0.283/kWh[1]

Sources & data version

  1. U.S. Department of Energy, Energy Saver (n.d.). Electric Resistance Heating. energy.gov/energysaver. Verified 2026-10-02.
  2. U.S. Department of Energy, Energy Saver (n.d.). Furnaces and Boilers. energy.gov/energysaver. Verified 2026-10-02.
  3. U.S. Department of Energy (2025). 10 CFR Part 430, Subpart B, Appendix M1: test procedure for central air conditioners and heat pumps (2025 edition). Code of Federal Regulations (annual edition revised as of 2025-01-01), govinfo.gov. Verified 2026-10-02.
  4. U.S. Energy Information Administration (n.d.). Energy Explained: British thermal units (Btu), conversion factors. eia.gov. Verified 2026-10-02.
  5. Cutler D, Winkler J, Kruis N, Christensen C, Brandemuehl M (2013). Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations. National Renewable Energy Laboratory, Technical Report NREL/TP-5500-56354 (DOI 10.2172/1067909). Verified 2026-10-02.
  • Electricity price: Household electricity prices nrg_pc_204 (Eurostat), 2026-S1 (version 2026-S1+b939c9d6, fetched 2026-11-20)
  • Propane heat content: Propane: 1 gallon = 91,452 Btu. EIA “sample” conversion factor, recalculated each year; current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)
  • Heating oil heat content: Heating oil: 1 gallon = 138,500 Btu. EIA “sample” conversion factor; EIA states no further basis (it lists diesel fuel separately at 137,381 Btu per gallon). Current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)

Changelog · Methodology

Use this result in

Add the options you can choose between: a heat pump’s HSPF2 (or COP), and the price and AFUE of gas, propane or oil. Only the electricity price comes from the data for your location.

United Kingdom
Inputs

Best answer

Lowest cost per kWh of heat (of the options entered)£0.257/kWh

Scope: cost of heat delivered by the equipment (duct and distribution losses, maintenance and installation not included)

£0.257/kWh£0.257/kWh
Low £0.257/kWh · likely £0.257/kWh · high £0.257/kWh

No input here carries a documented range, so no range is shown.

Electric resistance: per kWh of heat
£0.257/kWh
Heat pump: per kWh of heat
enter its HSPF2 or COP
Gas furnace: per kWh of heat
enter a gas price and AFUE
Propane: per kWh of heat
enter a propane price and AFUE
Heating oil: per kWh of heat
enter an oil price and AFUE

Formula Showdown

There is one formula: price per unit of fuel energy ÷ efficiency. The open question is the heat pump’s efficiency outside its rating climate: the rated HSPF2 is one value for one climate region, and a climate-adjusted method is waiting for a verified source.

Solve for any input

Show the work
  1. Electric resistance heat: cost per kWh of heat: Electricity price ÷ 100% efficiency
    c_res = £0.257/kWh ÷ 100% = £0.257/kWh[1]

Sources & data version

  1. U.S. Department of Energy, Energy Saver (n.d.). Electric Resistance Heating. energy.gov/energysaver. Verified 2026-10-02.
  2. U.S. Department of Energy, Energy Saver (n.d.). Furnaces and Boilers. energy.gov/energysaver. Verified 2026-10-02.
  3. U.S. Department of Energy (2025). 10 CFR Part 430, Subpart B, Appendix M1: test procedure for central air conditioners and heat pumps (2025 edition). Code of Federal Regulations (annual edition revised as of 2025-01-01), govinfo.gov. Verified 2026-10-02.
  4. U.S. Energy Information Administration (n.d.). Energy Explained: British thermal units (Btu), conversion factors. eia.gov. Verified 2026-10-02.
  5. Cutler D, Winkler J, Kruis N, Christensen C, Brandemuehl M (2013). Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations. National Renewable Energy Laboratory, Technical Report NREL/TP-5500-56354 (DOI 10.2172/1067909). Verified 2026-10-02.
  • Electricity price: UK domestic energy prices (DESNZ Tables 2.2.4 electricity / 2.3.4 gas), 2025 average (version 2025+e228469f, fetched 2026-10-02)
  • Propane heat content: Propane: 1 gallon = 91,452 Btu. EIA “sample” conversion factor, recalculated each year; current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)
  • Heating oil heat content: Heating oil: 1 gallon = 138,500 Btu. EIA “sample” conversion factor; EIA states no further basis (it lists diesel fuel separately at 137,381 Btu per gallon). Current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)

Changelog · Methodology

Use this result in

Add the options you can choose between: a heat pump’s HSPF2 (or COP), and the price and AFUE of gas, propane or oil. Only the electricity price comes from the data for your location.

Switzerland
Inputs

Best answer

Lowest cost per kWh of heat (of the options entered)CHF 0.298/kWh

Scope: cost of heat delivered by the equipment (duct and distribution losses, maintenance and installation not included)

CHF 0.298/kWhCHF 0.298/kWh
Low CHF 0.298/kWh · likely CHF 0.298/kWh · high CHF 0.298/kWh

No input here carries a documented range, so no range is shown.

Electric resistance: per kWh of heat
CHF 0.298/kWh
Heat pump: per kWh of heat
enter its HSPF2 or COP
Gas furnace: per kWh of heat
enter a gas price and AFUE
Propane: per kWh of heat
enter a propane price and AFUE
Heating oil: per kWh of heat
enter an oil price and AFUE

Formula Showdown

There is one formula: price per unit of fuel energy ÷ efficiency. The open question is the heat pump’s efficiency outside its rating climate: the rated HSPF2 is one value for one climate region, and a climate-adjusted method is waiting for a verified source.

Solve for any input

Show the work
  1. Electric resistance heat: cost per kWh of heat: Electricity price ÷ 100% efficiency
    c_res = CHF 0.298/kWh ÷ 100% = CHF 0.298/kWh[1]

Sources & data version

  1. U.S. Department of Energy, Energy Saver (n.d.). Electric Resistance Heating. energy.gov/energysaver. Verified 2026-10-02.
  2. U.S. Department of Energy, Energy Saver (n.d.). Furnaces and Boilers. energy.gov/energysaver. Verified 2026-10-02.
  3. U.S. Department of Energy (2025). 10 CFR Part 430, Subpart B, Appendix M1: test procedure for central air conditioners and heat pumps (2025 edition). Code of Federal Regulations (annual edition revised as of 2025-01-01), govinfo.gov. Verified 2026-10-02.
  4. U.S. Energy Information Administration (n.d.). Energy Explained: British thermal units (Btu), conversion factors. eia.gov. Verified 2026-10-02.
  5. Cutler D, Winkler J, Kruis N, Christensen C, Brandemuehl M (2013). Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations. National Renewable Energy Laboratory, Technical Report NREL/TP-5500-56354 (DOI 10.2172/1067909). Verified 2026-10-02.
  • Electricity price: Swiss FSO (BFS) consumer price index: average prices for energy and motor fuels, monthly (su-d-05.02.91), 2026-10, household profile H4 (version 2026-10+aaa903f0, fetched 2026-11-20)
  • Propane heat content: Propane: 1 gallon = 91,452 Btu. EIA “sample” conversion factor, recalculated each year; current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)
  • Heating oil heat content: Heating oil: 1 gallon = 138,500 Btu. EIA “sample” conversion factor; EIA states no further basis (it lists diesel fuel separately at 137,381 Btu per gallon). Current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)

Changelog · Methodology

Use this result in

Add the options you can choose between: a heat pump’s HSPF2 (or COP), and the price and AFUE of gas, propane or oil. Only the electricity price comes from the data for your location.

Norway
Inputs

Best answer

Lowest cost per kWh of heat (of the options entered)NOK 1.23/kWh

Scope: cost of heat delivered by the equipment (duct and distribution losses, maintenance and installation not included)

NOK 1.23/kWhNOK 1.23/kWh
Low NOK 1.23/kWh · likely NOK 1.23/kWh · high NOK 1.23/kWh

No input here carries a documented range, so no range is shown.

Electric resistance: per kWh of heat
NOK 1.23/kWh
Heat pump: per kWh of heat
enter its HSPF2 or COP
Gas furnace: per kWh of heat
enter a gas price and AFUE
Propane: per kWh of heat
enter a propane price and AFUE
Heating oil: per kWh of heat
enter an oil price and AFUE

Formula Showdown

There is one formula: price per unit of fuel energy ÷ efficiency. The open question is the heat pump’s efficiency outside its rating climate: the rated HSPF2 is one value for one climate region, and a climate-adjusted method is waiting for a verified source.

Solve for any input

Show the work
  1. Electric resistance heat: cost per kWh of heat: Electricity price ÷ 100% efficiency
    c_res = NOK 1.23/kWh ÷ 100% = NOK 1.23/kWh[1]

Sources & data version

  1. U.S. Department of Energy, Energy Saver (n.d.). Electric Resistance Heating. energy.gov/energysaver. Verified 2026-10-02.
  2. U.S. Department of Energy, Energy Saver (n.d.). Furnaces and Boilers. energy.gov/energysaver. Verified 2026-10-02.
  3. U.S. Department of Energy (2025). 10 CFR Part 430, Subpart B, Appendix M1: test procedure for central air conditioners and heat pumps (2025 edition). Code of Federal Regulations (annual edition revised as of 2025-01-01), govinfo.gov. Verified 2026-10-02.
  4. U.S. Energy Information Administration (n.d.). Energy Explained: British thermal units (Btu), conversion factors. eia.gov. Verified 2026-10-02.
  5. Cutler D, Winkler J, Kruis N, Christensen C, Brandemuehl M (2013). Improved Modeling of Residential Air Conditioners and Heat Pumps for Energy Calculations. National Renewable Energy Laboratory, Technical Report NREL/TP-5500-56354 (DOI 10.2172/1067909). Verified 2026-10-02.
  • Electricity price: Statistics Norway table 09387: electricity price, grid rent and taxes for households (quarterly), 2026-Q3, incl. grid rent and taxes, government support deducted (version 2026-Q3+3865939a, fetched 2026-11-20)
  • Propane heat content: Propane: 1 gallon = 91,452 Btu. EIA “sample” conversion factor, recalculated each year; current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)
  • Heating oil heat content: Heating oil: 1 gallon = 138,500 Btu. EIA “sample” conversion factor; EIA states no further basis (it lists diesel fuel separately at 137,381 Btu per gallon). Current annual values are in the Monthly Energy Review, Appendix A (U.S. Energy Information Administration; editable)

Changelog · Methodology

Use this result in

Add the options you can choose between: a heat pump’s HSPF2 (or COP), and the price and AFUE of gas, propane or oil. Only the electricity price comes from the data for your location.

Assumptions & limits

Questions

Why can a heat pump beat gas even though electricity costs more per kWh?
A heat pump moves heat rather than making it, so it delivers several kWh of heat per kWh of electricity (its COP).
Which option is cheapest for me?
The headline shows the lowest cost per kWh of heat among the options you entered. Running cost is not the whole story: use the heat pump vs gas furnace calculator to include the installed cost.

Related

By The Best Calculator. Reviewer: review pending. Claude (AI) drafts code and text under human direction (methodology).